So commence the list of swear words we used trying to get the aluminum to fit…
…. wait, this is suppose to be family friendly, so we can skip the list. We did end up getting the aluminum back on, but in that we found we had to use decking finishing screws to get the ridge for the sealer back in place. they were also 1 1/4 screws. Once it was all back together we put all of the trim pieces back on. I then used the prescribed sealant this was the best I found it holds well and kept to aluminum skin nice.
We also installed a new vent that had a fan included. Here is the one we purchased
After we did that we let the camper sit closed after a rain storm and there were puddles on the roof.
So today, after a considerable amount of thoughts, we have added Eterna Bond over the sealant and down the middle seam. This was an amazing product and I am very happy with how it settled down, it was a simple and clean application
Here is what the roof looks like now.
One thought on “Roof Rebuild Part 4”